On the Setup tab, each Device can be set to a static IP by revealing the Settings after clicking the gear icon. This allows for manually assigning the WiFiRanger with a static IP by Device.
This feature is useful if connecting to an internet source that does not issue DHCP addresses. In these cases, assign a Static IP Address within the source’s IP scheme and enter the corresponding Subnet Mask and Gateway IP.
Once a Static IP is configured for the appropriate Device, connect to the non-DHCP internet source.
Created : 2014-03-11 16:04:46, Last Modified : 2016-09-28 22:15:19
Add a Comment